Point-to-point (PtP) wireless connectivity is a proven and widely used networking solution to connect two locations without laying fiber. It is commonly deployed for office-to-office connectivity, factories, warehouses, CCTV backhaul, ISPs, schools, and branch offices.
Choosing the correct point-to-point wireless hardware is critical for achieving stable performance, reliable bandwidth, and long-term scalability. This guide is based on real field experience shared by vendor engineers and system integrators.
What Is Point-to-Point Wireless Connectivity?
Point-to-point wireless connectivity uses directional radios and antennas to create a dedicated wireless bridge between two locations. It eliminates dependency on leased lines and fiber while delivering reliable throughput over long distances when designed correctly.
- Requires clear Line of Sight (LOS)
- Highly dependent on antenna alignment and Fresnel clearance
- Cost-effective alternative to fiber
Corrected and Practical Device Comparison Table
Note: Throughput values represent realistic field-tested TCP performance, not theoretical speeds.
| Device Model | Practical Range | Practical Throughput | Recommended Use Case |
|---|---|---|---|
| MikroTik SXTsq Lite5 | Up to 5 km | 70–90 Mbps | Small offices, CCTV backhaul |
| MikroTik LHG 5 | Up to 10 km | 40–60 Mbps | Office interconnect, basic backhaul |
| MikroTik LHG XL HP5 | Up to 15 km | 40–60 Mbps | High-noise environments |
| MikroTik LHG XL 5 ac | Up to 15 km | 90–120 Mbps | Higher bandwidth office links |
| MikroTik NetMetal 5 + 30 dBi Dish | 25–30 km | 100–150 Mbps | Enterprise and ISP backhaul |
| Mimosa C5x | Up to 10 km | 400–500 Mbps | High-capacity short-distance links |
| Mimosa C5c + 30 dBi Dish | 25–30 km | 180–250 Mbps | Long-distance enterprise backhaul |
MikroTik Point-to-Point Wireless Devices
MikroTik SXTsq Lite5
A compact and budget-friendly radio best suited for short-distance links. Ideal for small offices, temporary connectivity, and CCTV backhaul where bandwidth demand is moderate.
MikroTik LHG Series (LHG 5 / LHG XL HP5)
The LHG series is popular due to its integrated high-gain antenna. The HP variant performs better in noisy RF environments and rural deployments.
MikroTik LHG XL 5 ac
An improved AC-based model delivering higher throughput. Recommended where better speed and future scalability are required.
MikroTik NetMetal 5 with Dish Antenna
A modular enterprise-grade solution allowing antenna flexibility. Best used by experienced installers with proper RF planning.
Mimosa Point-to-Point Wireless Solutions
Mimosa C5x
A high-performance radio designed for low latency and high throughput. Suitable for ERP systems, video streaming, VoIP, and enterprise applications.
Mimosa C5c with 30 dBi Dish
Designed for long-distance and high-capacity backhaul. Widely used by ISPs and enterprises for mission-critical links.
Comparison with Other Wireless Brands
Ubiquiti Networks
- airMAX Rocket Prism 5AC – Up to 200+ Mbps
- airFiber 5XHD – 500+ Mbps over long distance
Pros: High throughput, wide user community
Cons: Firmware changes may affect stability
Cambium Networks
- ePMP Force 300-25 – Up to 600 Mbps
- PTP 550 – Carrier-grade performance
Pros: Excellent noise immunity, carrier-grade quality
Cons: Higher cost
How to Choose the Right Point-to-Point Wireless Hardware
- Distance and clear line of sight
- Required bandwidth (current and future)
- RF noise level in the area
- Mounting height and Fresnel zone clearance
- Budget versus reliability expectations
Best Point-to-Point Wireless Device by Distance
- Up to 5 km: MikroTik SXTsq Lite5
- 10–15 km: MikroTik LHG XL HP5 / LHG XL 5 ac
- 25–30 km: Mimosa C5c or NetMetal with dish
- High-capacity backbone: Mimosa or Cambium
Conclusion
Point-to-point wireless connectivity is a reliable and scalable alternative to fiber when designed correctly. Real-world performance depends more on proper hardware selection, RF planning, and installation quality than on datasheet specifications.
For site survey, RF planning, deployment, and support, professional consultation ensures long-term stability and performance.
Need help with wireless deployment?
Contact us for professional point-to-point wireless solutions, VPN integration, and enterprise networking support.
Need a Reliable Point-to-Point Wireless Connection?
We design, supply, and deploy professional point-to-point wireless solutions for offices, factories, CCTV networks, ISPs, and multi-branch businesses. 📞 WhatsApp Us 📩 Request Site Survey
